Removing Decals From Carbon Wheels

Just be sure to pad the rim against damage. The problem with decals on carbon rims is that if you don’t want them to look cheap, or peel off, you need to apply a clear coat over the wet slide.

mavic ellipse wheel set Fixed gear bike, Bike, Bicycle

Removing decals from carbon wheel.

Removing decals from carbon wheels. 1 bottle of acetone 1 cleaning rag(the more rugged the better,for abrasion) You would be risking a lot less then. Zipp states that while acetone (commonly used to remove nail polish) or denatured alcohol are safe, but echoing calvin jones, they state that both will ruin the decals.

We decided to come up with a few quick and easy tips on how make the removal process go smoothly. I did some research, and decided to move forward with suggested method of usitng a hair dryer to heat the decal and then removing/peeling it off. I did however purchase a unbranded ebay carbon frame and then sanded the decals off of my old fork.

I would not recommend this method, as it leaves alot of adhesive behind on the carbon. When stationary, blank carbon looks better imo :) Maybe cover them up if you don't like them.

Decals have become a popular way to customize vehicles in recent years. Takes a while but doesn't risk ruining the frame. Customer is responsible for shipping and handling and the crash replacement must be handled through atomik carbon directly.

While not a huge weight penalty, it still adds up especially with deeper dish wheels. Just finished taking the decals off an exotic stem with it. Contact atomik carbon directly, not the dealer where you purchased the product.

Removing these decals isnt as simple like removing stickers where you just peel them off and remove the left over glue,but they do have one thing in common the use of acetone. Planet x wheelset decals / ct45 stealth logo (12) planet x wheelset decals / 52mm/60mm carbon clincher (6) planet x wheelset decals / 52mm px lines logo (10) planet x wheelset decals / 52mm stealth logo (12) planet x wheelset decals / 60mm px lines logo (5) planet x wheelset. You'll also need rubbing alcohol to clean off any glue residue left when you've removed the decals if the heat gun has two settings (which mine does) use the low setting and just don’t get it too close.

If they are a cellulose based decal, then acetone or cellulose thinners should 'dissolve' them recipe: I just removed an exotic transfer from under the clearcoat on a carbon seatpost. Why they called tampos anyway?!

Even then you would have to dig into the frame, which is pretty tricky. Obtain a small propane torch and a couple of cotton rags. Blow dryer on hot, peel & heat as you go, easy as pie.

Removing decals underneath the carbon clearcoat. When securing a bicycle with carbon wheels on a car rack be sure not to use straps that can chafe and cut into the rim. Shave legs sparingly, rub in embrocation and.

It came off suprisingly easily with 400 grit wet sandpaper. I always use the hairdryer when removing decals and it's worked well. The wheels on the limited are $3800 alone and the di2 group goes for $3300 for just the shifters, f/r.

Much of the problem had to do with heat buildup. With tall rims you may need to replace the stock strap with a longer one. If only there was a way to apply a permanent graphic and not have to add a clear coat over top…

Returning the damaged product and starting the crash replacement process: While many are willing to hire a professional to install them, or even do it themselves, very few think of the removal process. Decals look great when the wheel is actually spinning.

One thing that won't harm carbon rims/wheels is hanging a bicycle from them on hooks for storage. Early carbon fibre wheels were pretty dire when it came to stopping, but manufacturers have engineered their way out of those early problems. Honestly, the best way to get these stickers off without any adhesive left behind is to simply pull them off.

Zipp also recommends goof off alongside latex paint removers. Carbon fiber is a lot more delicate than aluminum or steel. Here is a small tutorial in how to remove those nasty decals that easton baked to there rims.

There is a clear coat over the graphics, so you'd have to scrape that off before you even get to the label. Hold the rim to steady it and simple.

Camaro Steering Wheel customer of